Flow Meter [Mag. Meter]

Aquflow 'Mag-Meter' flow indicator meter uses magnetic waves to sense the flow of the conductive liquid

Accuracy of the pumps is very important, Aquflow pumps has +/- 1% accuracy so it is important to have an accurate flow indicator that can sense the flow. Seametric flow meter is accurate as same as the pump, it can detect low flow rate as low as 1.8 GPH, and it made from PVDF material that makes it compatible with most of the chemical. It uses the magnetic waves to sense the flow of the conductive liquid, that’s why it is called Mag.-Meter.

Standard Features:

 No moving parts.

  Requires no straight pipe.

 Pulse and/or 4-20 mA output.

Chemical and corrosion resistant.

 Insensitive to fluid density and fluid viscosity changes.

 

 

Specifications Measurements
Pump Size3/4”, 1/2”, 3/8”, 1/4”**
FittingsFlareTek fittings standard in 3/4” or 3/8” flowbody; NPT threaded adapters also available.
Body MaterialPVDF
Electrodes MaterialPVDF carbon fiber-filled
Ground MaterialPVDF carbon fiber-filled
Housing MaterialHDPE with glass fiber
Fittings (FlareTek) MaterialPVDF
Adapters (NPT) Material Polypropylene or PVDF
O-Rings (for NPT) MaterialEPDM or Viton
Ambient Temperature 0˚ to 130˚ F (-18˚ to 54˚ C)
Fluid Temperature32˚ to 200˚ F (0˚ to 93˚ C)
Pressure 150 PSI
Flow Range -07520 GPM Max. (0.2 GPM cut off)
Flow Range -0383 GPM Max. (0.03 GPM cut off)
Accuracy -075+/- 1% plus +/- 0.005 GPM of reading across rated range.
Accuracy -038+/- 1% plus +/- 0.002 GPM of reading across rated range.
Output SignalOptocoupled current sinking or current sourcing pulse output: 30 V DC 5 mA max 4-20 mA current loop: 7 V DC plus load voltage drop min; 50 V DC Max.
Output Signal -075 500 pulses/liter (1892 pulses/gallon)
Output Signal -038 1,000 pulses/liter (3785 pulses/gallon)
Power 10-15 Vdc, 150 mA (linear power supply recommended)
Conductivity >20 microSiemens
Empty Pipe Detection Hardware/software, conductivity-based
Environmental
NEMA 4X standard; IP 66 Splashproof standard

**Requires adaptors

Performance-Drop-Curve

PE102-075 with 3/4″ adapters.
PE102-038 with 3/8″ adapters.
Actual curve dependent on pipe size/fittings.